Project 08：Intelligent Integrated Traffic System

1. Introduction

We have learned a host of projects before, can we put them together to make an integrated traffic system？Maybe you can’t wait to do it，let’s get started!

The following are the tools we need.

2. Components


Kidsuno Mainboard×1	Traffic Light Module×1	Active Buzzer×1	Photoresistor×1

Obstacle Avoidance Sensor×1	Ultrasonic Adapter×1	Ultrasonic Sensor×1	8×8 Dot Matrix Display×1

White LED×1	270°Servo×1	20cm Connection Wire×4	30cm Connection Wire×3

USB Cable×1	Integrated Traffic System×1

3. Function: Make An Integrated Traffic System

4. Assembly Steps

Download the PDF follow the link：Traffic System System Assembly

Or you can Watch the assemble video ：

5. Wiring Diagram

Module	Kidsuno Mainboard	Module	Kidsuno Mainboard
Traffic Lights	Port 1(Red light→D3,Yellow light→D5,Green light→D6)	Active Buzzer	Port 6(D4)
Servo	Brown wire→G,Red wire→V,Yellow wire→D13	Obstacle Avoidance Sensor	Port 7(D8)
8×8 Dot Matrix	Port(5V, SDA, SCL, GND）	Photoresistor	Port 3(A3)
LED Module	Port 4(D2)	Ultrasonic Adapter Board	Port 9(Trig→D10, Echo→D11)