kidsbits blocks coding passive buzzer module is fully compatible with kidsbits control board and Lego building blocks.
You can easily connect it to kidsbits control board for communication using an RJ11 cable without worrying about wrong wiring and damage.
Here is the simplest sound making module. It mainly consists of a passive buzzer that has no oscillation circuit.
The buzzer cannot be actuated by itself, but by external pulse frequencies. Different frequencies produce different sounds.
It is really great for integrating into projects with this small but useful module. You can code the melody of a complete song to let the module play your own music.
Have a try! You will find the electronic sound it creates so fascinating.
2. Technical Parameters
- Interface: EASY plug
- Operating voltage: DC 5V
- Control signal: digital signal
3. Hookup Guide
4. Import kidsbits Library
Begin with the Mixly blocks coding, you should first import the corresponding kidsbits library for those sensor modules.
Connect the control board to your computer using a USB cable.
Then open the Mixly blocks software 0.998, set the board to UNO R3, select your correct COM port. On the upper right corner you can switch the language.
After that, click Import, import the keyes-kidsbits library. Shown below.
If import custom library successfully, you should see the sensor module library shown below.
Click on the Control output block of keyes_kidsbits, you can directly use the corresponding module.
5. Open Code
Open the code folder we provided, or you are able to directly drag the code to Mixly window.
You can click the Code or click the right side arrow to check out the code language.
6. Test Result
Hook it up and upload the code success, you should be able to hear a song.